M5, L-styli angled stepped, ruby sphere, tungsten carbide shaft
L-stylus 15° M5, DK0.5 L44.5
626115-5000-947
Angled L-styli for measuring undercuts and angled bores. M5 thread for VAST active scanning sensors.
- Spherical styli have the same probing behavior in every direction
- Ruby is the most common sphere material
- Ruby sphere available from 0.2 up to 12 mm
- Tungsten carbide shaft with high rigidity
- Higher stability through stepped shaft
- Angled geometry for special angular positions
- Proven ZEISS quality through high-end manufacturing
- product type
- Stylus
- Connection Type
- M5
- Ø Sphere (DK)
- 0,5 mm
- Length (L)
- 44,5 mm
- Application
- Tactile
- Ø Shaft (DS)
- 3,5 mm
- Ø Body (DG)
- 11,0 mm
- Meas. Len.
- 34,5 mm
- Stylus Type
- L-Stylus
- Ø2 Shaft (DSE)
- 1,5 mm
- 2. Meas. Len.
- 12,8 mm
- Stylus Tip
- Sphere
- Styl. Tip Mat.
- Ruby
- Shaft Mat.
- Tung. Carb.
- 3. Meas. Len.
- 2,8 mm
- Ø3 Shaft(DSF)
- 0,4 mm
- 1. Angle (°)
- 15,0 °
- Width (B)
- 6,0
- Weight
- 8,6 g
Product note
Depending on the material of the stylus and the workpiece, wear or material deposits may occur. Therefore, regularly check your styli under a microscope and remember to clean them or replace them if damaged. Depending on the type and degree of contamination, a wide range of cleaning agents are available for cleaning. ZEISS application engineers recommend stylus cleaning wipes or microfiber cloths.
Recently Viewed
L-stylus 15° M5, DK0.5 L44.5
626115-5000-947
4.160,00 krexcl. VAT
Available
TEMPAR single temperature sensor, factory calibration
626140-9141-043
7.725,00 krexcl. VAT
Longer delivery time
Reference stylus M3 XXT, DK5 L50
626103-0501-050
1.637,00 krexcl. VAT
Available
Stylus straight M3, DK4 L59
626123-0404-059
765,00 krexcl. VAT
Expected soon
Stylus straight M5, DK20.7 L63
626115-2001-063
6.801,00 krexcl. VAT
Longer delivery time
Stylus stepped M3, DK0.4 L25
626123-5344-025
542,00 krexcl. VAT
Available
Stylus stepped M5, DK2 L180
626115-0200-180
2.456,00 krexcl. VAT
Available
Stylus stepped M2, DK1 L38
626102-0044-038
594,00 krexcl. VAT
Expected soon
Diamond!Scan© precisionStylus straight M5, DK2 L37
626115-0139-037
8.111,00 krexcl. VAT
Made to Order
Disk M5, DK120
626101-2001-005
9.100,00 krexcl. VAT
Longer delivery time